Publikationen

Grasping the Lithium hype: Insights into modern dental Lithium Silicate glass-ceramics

Autor(en)
Julia Lubauer, Renan Belli, Herwig Peterlik, Katrin Hurle, Ulrich Lohbauer
Abstrakt

Objectives: Lithium-based glass-ceramics are currently dominating the landscape of dental restorative ceramic materials, with new products taking the market by storm in the last years. Though, the difference among all these new and old products is not readily accessible for the practitioner, who faces the dilemma of reaching a blind choice or trusting manufacturers’ marketing brochures. To add confusion, new compositions tend to wear material terminologies inherited from vanguard dental lithium disilicates, disregarding accuracy. Here we aim to characterize such materials for their microstructure, crystalline fraction, glass chemistry and mechanical properties. Methods: Eleven commercial dental lithium-based glass ceramics were evaluated: IPS e.max® CAD, IPS e.max® Press, Celtra® Duo, Suprinity® PC, Initial™ LiSi Press, Initial™ LiSi Block, Amber® Mill, Amber® Press, N!CE®, Obsidian® and CEREC Tessera™. The chemical composition of their base glasses was measured by X-Ray Fluorescence Spectroscopy (XRF) and Inductive Coupled Plasma Optical Emission Spectroscopy (ICP-OES), as well as the composition of their residual glass by subtracting the oxides bound in the crystallized fraction, characterized by X-Ray Diffraction (XRD) and Rietveld refinement, and quantified accurately using the G-factor method (QXRD). The crystallization behavior is revealed by differential scanning calorimetry (DSC) curves. Elastic constants are provided from Resonant Ultrasound Spectroscopy (RUS) and the fracture toughness measured by the Ball-on-Three-Balls method (B3B- K Ic). The microstructure is revealed by field-emission scanning electron microscopy (FE-SEM). Results: The base glasses showed a wide range of SiO2 /Li2O ratios, from 1.5 to 3.0, with the degree of depolymerization dropping from ½ to 2/3 of the initial connectivity. Materials contained Li2SiO3+Li3PO4, Li2SiO3+Li3PO4+Li2Si2O5, Li2Si2O5+Li3PO4+ Cristobalite and/or Quartz and Li2Si2O5+Li3 PO4+LiAlSi2O6, in crystallinity degrees from 45 to 80 vol%. Crystalline phases could be traced to their crystallization peaks on the DSC curves. Pressable materials and IPS e.max® CAD were the only material showing micrometric phases, with N!CE® and Initial™ LiSi Block showing solely nanometric crystals, with the rest presenting a mixture of submicrometric and nanometric particles. Fracture toughness from 1.45 to 2.30 MPa√m were measured, with the linear correlation to crystalline fraction breaking down for submicrometric and nanometric crystal phases. Significance: Dental lithium-based silicate glass-ceramics cannot be all put in the same bag, as differences exist in chemical composition, microstructure, crystallinity and mechanical properties. Pressable materials still perform better mechanically than CAM/CAM blocks, which loose resistance to fracture when crystal phases enter the submicrometric and nanometric range

Organisation(en)
Dynamik Kondensierter Systeme
Externe Organisation(en)
Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
Journal
Dental Materials
Band
38
Seiten
318-332
Anzahl der Seiten
15
ISSN
0109-5641
DOI
https://doi.org/10.1016/j.dental.2021.12.013
Publikationsdatum
12-2021
Peer-reviewed
Ja
ÖFOS 2012
103018 Materialphysik, 302088 Zahn-, Mund- und Kieferheilkunde
Schlagwörter
ASJC Scopus Sachgebiete
Mechanics of Materials, Materials Science(all), Dentistry(all)
Link zum Portal
https://ucris.univie.ac.at/portal/de/publications/grasping-the-lithium-hype-insights-into-modern-dental-lithium-silicate-glassceramics(9ea73b5a-2522-4907-bf0f-c165665119d2).html