Publications

HPT production of large bulk skutterudites

Author(s)
Gerda Rogl, Sanyukta Ghosh, Oliver Renk, Kunio Yubuta, Andriy Grytsiv, Erhard Schafler, Michael Zehetbauer, Ramesh C. Mallik, Ernst Bauer, Peter Rogl
Abstract

This paper documents that consolidation and subsequent severe plastic deformation of commercial skutterudite powders via high pressure torsion (HPT) serves for an easy, fast, cheap and sustainable production method for excellent n-type skutterudite bulks, (Sm,Mm)(0.15)Co4Sb12, with high ZT values. Large cylindrical samples with 30 mm in diameter and 8 mm thickness (similar to 55 g) were successfully prepared in one step. These large samples enabled for the first time to (i) study the influence of shear strain on the micro-structural, thermoelectric and mechanical properties by analysing specimens cut from various positions of the HPT disks and (ii) to evaluate these properties orientation sensitive. These investigations were supported by electron probe microanalyses, transmission electron microscopy as well as XPD full profile analyses, XPS, Raman and Hall measurements. Whilst the orientation dependence on the electrical and thermal conductivity is found to be rather weak, the applied shear strain has a pronounced influence, as with increasing strains the thermal conductivity was reduced to the targeted levels. This beneficial effect, however, is accompanied by a massive increase of the electrical resistivity. ZT values turned out to be rather homogeneous over the entire sample with ZT similar to 1.3 at 850 K. (C) 2020 Elsevier B.V. All rights reserved.

Organisation(s)
Department of Materials Chemistry, Dynamics of Condensed Systems, Physics of Nanostructured Materials
External organisation(s)
Indian Institute of Science, Montanuniversität Leoben, Tohoku University, Technische Universität Wien
Journal
Journal of Alloys and Compounds
Volume
854
No. of pages
11
ISSN
0925-8388
DOI
https://doi.org/10.1016/j.jallcom.2020.156678
Publication date
02-2021
Peer reviewed
Yes
Austrian Fields of Science 2012
104017 Physical chemistry, 103006 Chemical physics, 205019 Material sciences, 211104 Metallurgy
Keywords
ASJC Scopus subject areas
Mechanics of Materials, Mechanical Engineering, Metals and Alloys, Materials Chemistry
Portal url
https://ucris.univie.ac.at/portal/en/publications/hpt-production-of-large-bulk-skutterudites(c02def24-c88d-4fe6-b24e-5a0cb683139b).html